International Symposium on Polymeric Materials for Regenerative Medicine

ORGANIZERS NRC-CNRC Quebec Materials Network

PARTNERS

 

Book of abstracts (pdf file - Acrobat)

Program

Day 1 - April 2, 2007

08h00 Registration
  Session Chair:
P. Vermette, Chemical Engineering Department, U. of Sherbrooke, Canada
08h30 Plenary Lecture:
Foundation Ideas for Tissue Engineering as Applied to Heart Muscle and Esophagus
B. D. Ratner, U. of Washington, USA
09h20 Invited: Biological Design Strategies for Bone Engineering
J. Davies, U. of Toronto, Canada
09h40 Invited: Repair of Cartilage and Meniscus with Hybrid Biomaterials
M. D. Buschmann, École Polytechnique de Montreal, Canada
10h00 Break
10h20 Key Note Lecture:
Challenges of Bone Tissue Regeneration using Distraction Osteogenesis

R. Hamdy, Shriner’s/U. McGill, Canada
11h00 Functionalized Dextrans as Biomaterials for Bone Regeneration
F. Chaubet, M. Maire, D. Logeart-Avramoglou, M-C Degat, P. Mary, C. Blanchat, A. Meunier, INSERM, CNRS, France
11h20 Invited: POSS-Polyurethanes as Biodegradable Nanocomposites
P. T. Mather, Case Western Reserve U., USA
11h40 In Vitro Mineralization of Phosphate-Containing PolymersIn Vitro Mineralization of Soluble and Cross Linked Phosphate Polymer
S. Suzuki, M. R. Whittaker, L. Grøndahl, M. J. Monteiro, E. Wentrup-Byrne, Queensland U. of Technology, Australia
12h00 Lunch
  Session Chair:
P. Beaulé, Orthopedic Surgery, U. of Ottawa, Canada
13h05 Key Note Lecture:
Stepping from Discovery into Development

M. Shive, BioSyntech Canada Inc., Canada
13h45 Highly Structured and Fully Interconnected Porous Polymer Scaffolds From Co-Continuous Polymer Blends
P. Sarazin, X. Roy and B. D. Favis. Ecole Polytechnique de Montreal, Canada
14h05 Physical and Numerical Simulation of 3D Polymeric Scaffolds for Load-Bearing Tissue Engineering and Cell-Based Gene Therapy
R. El-Ayoubi, A.-M. Yousefi, R. DiRaddo, IMI-NRC, Canada
14h25 Break
14h45 Invited: Biomimetic Processing of Biopolymer/Bioceramic Composites
R. Wang, U. of British Columbia, Canada
15h05 Osseointegration of Biomimetic HA-Coated Composite Hip Implants
M. N. Bureau, H. Shen, J.F. Whitfield, C. Bihun, M. Campbell, H. Bougherara, J.-G. Legoux, L’H. Yahia, IMI/NRC-IBS/NRC-École Polytechnique, Canada
15h25 Plastic Compression: Rapid Fabrication of Native Collagenous Tissue Templates
S. N. Nazhat, M. Bitar, V. Salih, R. A. Brown, U. McGill-University College, UK
15h45 Biodegradable Poly(lactide-co-glycolide) as Bone Filling Material
J. Holmbom, T. Tirri, T. Wilson, A. Rosling, T. Närhi, R. Penttinen. U. of Turku, Finland
16h05 To be confirmed
 
16h25 Cocktail - Poster Session
18h30 End of Day 1

Day 2 - April 3, 2007

08h00 Registration
  Session Chair:
J.-F. Cailhier, Faculty of Medicine, U. of Montreal, Canada
08h40 Key Note Lecture:
Drug Eluting Stents

L. Machan, U. of British Columbia and Angiotech, Canada
09h20 Invited: Critical Integrative Aspects: Unavoidable Challenges for Clinically Successful Tissue Engineering
F. Auger, St-François d’Assise Hospital/U. Laval, Canada
09h40 Invited: Natural Polymer-Based Grafts for Vascular Applications
D. Letourneur, INSERM, France
10h00 Break
10h20 Invited: New Fibrous PET Structures for Vascular Grafts: Effect of Fiber Structure on Endothelial and Smooth Muscle Cell Attachment and Growth
M. Moreno, A. Ajji and M.N. Bureau, IBS/NRC and IMI/NRC, Canada
10h40 Modified PEG Thin Layers for the Evaluation of Platelet Activation from Whole Blood Samples
Y. Martin, M. Lepine and P. Vermette. U. de Sherbrooke, Canada
11h00 Aging of a Plasma Fluoropolymer Coating Developed for Stent Applications
P. Hale, F. Lewis, P. Horny, S. Turgeon, D. Mantovani, Institut des Biomatériaux du Quebec-CHUQ, Canada
11h20 Nitrogen-Rich Plasma Polymers (PPE:N) for Bio-Medical Applications: Comparison of Films Deposited in Atmospheric and Low Pressure Plasmas
P.-L. Girard-Lauriault, F. Truica-Marasescu, S. Lerouge, F. Mwale, A. Lippitz, W.E.S. Unger, P. Desjardins, and M.R. Wertheimer. Ecole Polytechnique and U. de Montreal, Canada
11h40 Invited: Thrombo-Inflammation and in Stent Restenosis
Y. Merhi, MHI-ICM, U. de Montreal, Canada
12h00 Lunch
  Session Chair:
M. Sikorska, Institute for Biological Sciences, National Research Council, Canada
13h05 Key Note Lecture:
Engineering Approaches for Functional Nerve Regeneration

C. E. Schmidt, U. of Texas at Austin, USA
13h45 New Approach for Spinal Cord Regeneration Using a Synthetic Macroporous PHPMA Hydrogel Matrix
É. Pinet, V. Tsymbaliuk, Y. Yaminskyy, V. Medvedjev, S. Pouliot and M. Bousmina, Fiso Tech. & U. Laval, Canada
14h05 Invited: Repairing the Injured Brain with Ex Vivo-Engineered Neuroscaffolds
M. Bani-Yaghoub, R. Tremblay, A. Ajji, T. Veres, E. Roy, B. Zurakowski, L. Tay, A. Gruslin and M. Sikorska, IBS/NRC and IMI/NRC, Canada
14h25 Break
14h45 Stem Cells in Tissue Engineering : Neuronal Differentiation and a Preliminary Study on the Cell Integration in a 3D Scaffold
C. Auclair-Daigle, M. Gingras, M.-F. Champigny, F. Berthod, U. Laval, Canada
15h05 Invited: In Vitro Evaluation of Porous Scaffolds for Oral tissue Regeneration
J.P. Santerre, C. Hui and E. Saxena, U. of Toronto, Canada
15h25 Endothelial Cells on Two- and Three-Dimensional Fibrin Assemblies Coated with Ultrathin Protein Layers
E. Filová, L. Bačáková, J. Chlupá, ,T. Riedel, E. Brynda, M. Houska, Academy of Sciences, Czech Republic
15h45 The Biocompatibility of Microcapsules for Cellular Therapy : A Closer Look at the Interface
S.K. Tam, P. de Vos, J.-P. Hallé, L’H. Yahia. ICM, U. Medical Center Groningen, Ecole Polytechnique, The Netherlands, Canada
16h05 Novel Biomimetic Responsive Hydrogel from Crosslinked Protein Polymer Resilin
M.Y. Truong, N. K. Dutta, N. D. Tran N. R. Choudhury, A. J. Hill, M. Kim, C. Elvin, U. of South Australia, Australia
16h20 Cocktail - Poster Session
18h30 End of Day 2

Day 3 - April 4, 2007

   
  Session Chair:
F. Berthod, Hôpital du Saint-Sacrement, Laval University, Canada
08h40 Key Note Lecture:
Designing Cationic Polymers for Gene Delivery: Beneficial Effects of Hydrophobic Ligands Conjugated to Polymers

H. Uludag, U. of Alberta, Canada
09h20 Invited: Synthetic Polymers and Cultured Endothelial Cells : a Marriage of Convenience for Small-Diameter Arterial Substitution
L. Bordenave, U. Victor Segalen, France
09h40 Spatially Controlled Cell Adhesion via Micropatterned Surface Modification of Poly(dimethylsiloxane)
N. Patrito, C. McCague, N. O. Petersen, P. R. Norton, U. Western Ontario, Canada
10h00 Break
10h20 Invited: Surface Modifications of Endovascular Biomaterials: Bioactive Coatings to Foster Vascular Repair
S. Lerouge, Hôpital Notre-Dame – U. de Montreal, Canada
10h40 Invited: Micropatterning Cell Signal Onto Biomaterials Surfaces to Improve Endothelialisation
V. Gauvreau, L. Gagné, G. Laroche, St-François d’Assise Hospital/U. Laval, Canada
11h00 Contribution of the Media and Adventitia Layers to Mechanical Properties of Tissue Engineered Vascular Constructs Reconstructed In Vitro by the Self-Assembly Approach
R. Gauvin, D. Larouche, T. Ahsan, F. A. Auger, R. M. Nerem, L. Germain, LOEX, Canada
11h20 Surface Modifications to Control Protein and Cell Adhesion: Of the Importance of Polymer Chain Conformation
L. Deschenes, Food Research and Development Centre, Canada
11h40 Development of 3D Bioactive Macroporous Scaffolds
H. Bramfeldt, P. Vermette, U. de Sherbrooke, Canada
12h00 Concluding Remarks
12h10 End of Conference

Posters

1 Improvement of Mechanical Properties of Dental PMMA by Incorporation of Impregnated Reinforcements
A. Nematollahzadeh and S.A. Ramazani, Sharif U. of Technology, Iran
2 Viscoelasticity and Biofouling of LIPOSOME Layers by Quartz Crystal Microbalance and Multi Release Profiles
H. Brochu, P. Vermette, U. de Sherbrooke, Canada
3 Processing of Photopolymerizable, Injectable and Bioresorbable Polyurethanes
R. L. Orefice, F. T. R. Kinoshita, I. Salgado, Federal U. of Minas Gerais, Brazil
4 Structure of Glycerolized Irradiated Skin Allografts (GISA)
Z. Yaping, Shanxi Provincial Tissue Bank, China
5 Development of Oxygen Carriers for Tissue Engineering
V. Centis, P. Vermette, U. de Sherbrooke, Canada
6 Synthetic Hydrogels Prepared via Photopolymerisation
C. Witthayaprapakorn, R. Molloy, K. Nalampang, Chiang Mai U., Thailand
7 In Vitro Development by Tissue Engineering of a Three-Dimensional Model to Study Axonal Migration and Myelination of Motor Neurons
M. Gingras, V. Gagnon, H. D. Durham and F. Berthod, Laboratoire d'Organogénèse Expérimentale LOEX, U. Laval, Canada
8 Enhancement of Surface Biocompatibility of PTFE by Low Pressure Plasma Techniques
P. Jedrzejowski, P. Chevallier, F. Boccafoschi, C. Côté, D. Mantovani and A. Sarkissian, Plasmionique Inc & U. Laval, Canada
9 In Vitro Modulation of Angiogenesis by Neurotrophins and Schwann Cells in an Endothelialized Tissue-Engineered Connective Tissue
M. Blais, P. Lévesque, M. Gingras, F. Berthod, U. Laval, Canada
10 Elastomeric Materials Produced From Self-Assembling, Recombinant Polypeptides Modeled on Elastin
F.W. Keeley and C. M. Bellingham, The Hospital for Sick Children, Canada
11 Vascular Smooth Muscle Cells in Cultures on Synthetic Polymers with Adhesive Microdomains
M. Parizek, L. Bacakova, V. Lisa, O. Kubova, V. Svorcik, J. Heitz,  Academy of Science, Czech Republic
12 Effect of the Conjugation Strategy on Immobilized Fibronectin Orientation/ Conformation
K. Vallières, C. Sarra-Bournet, P. Chevallier, S. Turgeon, G. Laroche, U. Laval, Canada
13 The Osteogenic Activities of bFGF and BMP-2 on Bone Marrow Stromal Cells Grown in Aggregate Culture
A. Rajesh, M. Varkey, C. Kucharski, and H. Uludag, U. of Alberta, Canada
14 Textile Micro-Texture Effects on Endothelial Cells Adhesion and Proliferation
S. François, N. Chakfé, B. Durand, G. Laroche, U. Laval, Canada
15 Oxidation of Polycaprolactone to Induce Compatibility with Other Degradable Polyesters for Biomedical Applications
M. A. Sabino, U. Simon Bolivar, Venezuela
16 Collagen-Chondroitin Sulfate Coatings to Promote Vascular Repair
C. Charbonneau, M.J. Hebert, X.X. Zhu, S. Lerouge, CHUM, U. de Montreal, Canada
17 Extended Application of Porous PHEMA Hydrogels in Tissue Engineering
X. Lou, C. Li, and Y.F. Zheng, Curtin U. of Technology, Australia
18 In Vivo Chemiluminescent Imaging of the Microvascular Network of an Endothelialized Tissue-Engineered Skin
O. Boa, F. Berthod, J. Symes, T. Galbraith, J. A. Medin, F. A. Auger, LOEX, Canada
19 Novel Bioactive Polymer-Apatite Nanocomposite Fibres and their Biocompatibility
S. Dimitrievska, A. Ajji, M. N. Bureau, A. Petit, L’H. Yahia, IMI/NRC-École Polytechnique, Canada
20 Hemocompatibility of New Fibrous PET Structures with and without Surface Modification
M. Maire, A. Ajji, M. N. Bureau, L. Robitaille, Y. Merhi, L’H. Yahia, IMI/NRC-ICM-École Polytechnique, Canada
21 Various Porous Structures for Biomedical Applications
F. Sadeghi, A. Ajji, IMI/NRC, Canada
22 A Biomimetic Prosthetic Approach for Cartilage Replacement: Soft Polyurethane Foam Processing
M.F. Champagne, M.N. Bureau, R. Gendron, IMI/NRC, Canada
23 A New Injectable Sclerosing Agent for the Prevention and Treatment of Endoleaks after Endovascular Aneurysm Repair
M.-C. Bonneviot, G. Soulez, J. Raymond, S. Lerouge. U. de Montreal, Canada

 
       

PMRM 2007 International Symposium on Polymeric Materials for Regenerative Medicine

NRC-CNRC Quebec Materials Network SSH